Do you know the installation steps for Jiangxi dense racks?
Date of release:2020-07-11 Author: Click:
Do you know the installation steps for Jiangxi dense racks?
1. The installation of the track is to slide the dense frame, which is one of the most important components of the dense frame. The installation of the track needs to be ensured to be horizontal. Only when the track is installed horizontally can the dense frame slide more smoothly. To ensure the level of the track, the ground must be flat first. If the ground is uneven, then when laying the track, pad iron must be laid on the ground first.
2. Install the chassis. The chassis is placed on the laid track and is usually pre made.
3. Fix the column. After the chassis is installed, it is necessary to fix the column. When fixing the column, pay attention to tightening the connecting screws between the column and the chassis. If not tightened, the dense frame will shake after installation.
4. Install the side panel and adjust the handle of the dense frame. The movement of the dense frame requires the rotation of the handle, so it is necessary to adjust it until the handle can flexibly and lightly control the sliding of the dense frame.
5. Installing the partition, hanging board, and top plate is the simplest step, as long as they are installed and fixed in the designated position
6. Install the door panel, and pay attention to whether the door seam is tightly closed after installation. If it is not tightly closed, it indicates that it is unqualified and needs to be readjusted.
7. Install dust covers, sealing strips, and catalog plates, and finally inspect the installation of the dense rack.
The address of this article:http://zgwjjtying.xypt.top/news/515.html
Key word:
The next one:What scenarios are dense shelves mainly used in?